Version History

CAN DL - 2.0.27.0
====================================
- 0023802: Task resources are freed twice in case of configuration error.
- 0023817: Evaluation of received frames leads to crash after reconfiguration of CAN_DL task.

CAN DL - 2.0.26.0
====================================
- 0023571: [Task] Add CAN_DL library for netX50&100 for rcX V2.1

CAN DL - 2.0.25.0
====================================
- 0022903: [Task] Add XC code definition.

CAN DL - 2.0.24.0
====================================
- 0022718: Restructure build process and folder structure for using waf.

CAN DL - 2.0.23.0
====================================
- 0021987: Firmware may crash if application does't return data.ind packets fast enough.

CAN DL - 2.0.22.0
====================================
- 0021268: Wrong call of event call back indication.

CAN DL - 2.0.21.0
====================================
- 0020880: Crash when receiving extended frames with identifier >= 0x800.

CAN DL - 2.0.20.1
====================================
- 0020709: Modified build process and distribution folder structure.

CAN DL - 2.0.20.0
====================================
- 0020210: Support of listen only mode.

CAN DL - 2.0.19.0
====================================
- 0020027: Fix Xc Reset, Load and Start functions.
- 0020028: Use rcX V2.0.8.18 for netX50 and netX100; rcX V2.1.3.0 for netX10 and netX51.
- 0019994: All functions must be reentrant!.

CAN DL - 2.0.18.0
====================================
- 0018989: ulDest & ulDestId are not copied to the packet when sending indications to the registered application task.

CAN DL - 2.0.17.0
====================================
- 

CAN DL - 2.0.16.0
====================================
- 0018174: CAN_DL_CMD_SET_FILTER_REQ packet returns an error.
- 0018033: High CPU load and dropped PDOs after connecting a slave with different baud rate.

CAN DL - 2.0.15.0
====================================
- 0018166: DataReq packet may be lost.
- 0013688: 12.5k baud is not acceptet.
- 0013681: Wrong error code on data request when CAN Controller not started.

CAN DL - 2.0.12.0
====================================
- 0017801: Not all events are indicated to the application task.

CAN DL - 2.0.11.0
====================================
- 0017343: Mistake in canDl_DataInd function can cause crash of the firmware.

CAN DL - 2.0.10.0
===================================
-----------------------------------------------------------------------------

CAN DL - 2.0.9.0
===================================
- 0016844: Wrong CAN event indication to upper task.

CAN DL - 2.0.9.0
===================================
- 0016844: Wrong CAN event indication to upper task.

CAN DL - 2.0.8.0 
===================================
- 0015735: 24V loss detection does not work.

CAN DL - 2.0.7.0 
===================================
- 0015024: Tiny support

CAN DL Task - V2.0.6.0
=======================================
- 0014016: Add support for data sending with high priority

CAN DL Task - V2.0.5.0
=======================================
- Fixed: Some frames can't be transported to the application timely

CAN DL Task - V2.0.4.0
=======================================
- Added a new function for fast data sending
- Fixed GetDiag request
- Added plausibility pre-check's for sending of CAN data using packet API

CAN DL Task - V2.0.3.0
=======================================
- Fixed failure behavior while auto baud detection

CAN DL Task - V2.0.2.0
=======================================
- Fixed Jamrules file of netX10 lib target

CAN DL Task - V2.0.1.0
=======================================
- Created
